Jackery HomePower 1000, 2000, and 3600 Models: Identity and Backup Limits
Separate Jackery HomePower generations and editions by rated output, expansion claims, and transfer equipment requirements.
“HomePower 1000,” “HomePower 2000,” and “HomePower 3600” identify several different products and editions. The manufacturer’s current US pages list specifications that vary by generation and variant. Read the complete name, including “Plus,” “v2,” or “Pro Max,” and verify the model on the label before using a specification or buying expansion equipment.
Read the model name with the output rating
| Model named on page | Listed capacity | Listed AC output | Other manufacturer claims that distinguish it |
|---|---|---|---|
| HomePower 1000 v2 | 1,024 Wh | 1,500 W | Page states “3 kV Surge Protection” and sub-10 ms switchover |
| HomePower 1000 Plus v2 | 1,024 Wh | 1,800 W | Page claims under-10-ms UPS; expansion up to 11 kWh with up to five 2 kWh batteries |
| HomePower 2000 Plus v2 | 2,048 Wh | 2,400 W | 4,800 W stated surge; US page lists 120 V / 60 Hz and four AC outlets |
| HomePower 3600 Plus | 3,584 Wh | 3,600 W | LFP; expansion to 21 kWh; Double Kit page claim up to 240 V |
| HomePower 3600 Pro Max | 3,584 Wh | 4,000 W | Dual-voltage product page; automatic-backup claims require supported transfer equipment |
| HomePower 3600 Plus Red Cross Edition | 3,584 Wh | 3,600 W | Edition page lists these same headline capacity and output figures; no distinct electrical profile is established |
These are page-specific manufacturer claims, not a complete regional compatibility matrix or independent test. Similar capacities do not make variants equivalent. In particular, the standard HomePower 1000 v2 and HomePower 1000 Plus v2 have different listed AC output ratings. “3 kV Surge Protection” is the wording on the standard v2 page; it is not a watt-based surge rating and should not be compared with a watt surge figure.
Separate station output from backup-system output
The 3600 Plus page lists a 3,600 W station and describes expansion to 21 kWh. Its Double Kit wording says output can reach 240 V, but that claim describes a configured system, not a single receptacle or permission to connect equipment to household wiring. The page does not establish a particular installed backup result.
The 3600 Pro Max page lists 4,000 W output and dual voltage, then makes automatic backup conditional on a supported manual, automatic, or smart transfer switch. It describes a single unit at up to 2,000 W for 120 V backup and 4,000 W at 240 V, with a parallel pair claiming twice those figures. A 10 ms switch claim and optional 40 A charging cable are also listed. Treat the station output, voltage configuration, and backup topology as separate fields. The page is not an installation plan and does not establish transfer behavior for a specific circuit or device.
The Red Cross Edition page names a special edition of the 3600 Plus and lists 3,584 Wh and 3,600 W. It does not establish a separate electrical specification or special operating capability. Do not infer that its bundle, accessories, or hardware match another 3600 Plus listing unless the exact package and manual say so. Page availability and shipping information can change and should be rechecked at purchase time.
Understand what the ratings do not tell you
Capacity in Wh is not the energy a particular AC load will receive. Inverter losses, load profile, station self-consumption, temperature, reserve settings, and configuration affect runtime. A surge number, when a page supplies one, also needs a duration and a compatible load before it can answer a startup question. The 2000 Plus v2 page’s 4,800 W stated surge does not guarantee that a motor or compressor will start.
The pages’ UPS or switchover labels do not establish no-break performance for a named computer, medical device, or other load. Confirm the exact manual’s restrictions and test only equipment whose manufacturer permits the arrangement. For any transfer-switch or building-backup use, rely on current equipment instructions and qualified local requirements; these product pages do not provide wiring instructions.
Verify before applying a family-level claim
Match the nameplate and manual to the complete product name and model code. Then check voltage and frequency, continuous output, port topology, expansion pack identity, and the exact backup mode you plan to use. Confirm that the currently sold accessory is named as compatible for that variant. The cited pages do not prove cross-generation pack compatibility, shared firmware behavior, usable energy, or independent runtime and transfer performance.
This comparison is most useful for eliminating a name mismatch before a deeper fit check. Select based on the load, voltage, duration, and topology you need, then validate those requirements against the exact model’s current manual. Do not choose from the largest family number or treat “Plus,” “v2,” and “Pro Max” as decorative labels.