DJI Power 1000 Mini Model Profile: Output, Charging, and UPS Limits

DJI identifies the Power 1000 Mini as model DYM1000M with a typical 1,008 Wh LFP battery. Its support specification lists 800 W continuous AC inverter output and 1,000 W maximum output in both the 100–120 V and 220–240 V profiles. The 1,000 W maximum is not the continuous rating. The page does not establish usable AC energy, a surge duration, or whether a particular appliance will start.

Keep regional output and bypass distinct

The support page lists region-dependent voltage and outlet configurations: four AC outlets for US and Japan-standard models, and two for China, Europe, Australia, and UK-standard models. This grouping does not independently map every country’s SKU, including Canada. Confirm the label and exact regional manual before applying a voltage, frequency, plug, or outlet assumption.

DJI lists separate grid-bypass maximums of 1,440 W for 100–120 V configurations and 2,200 W for 220–240 V configurations. These are bypass figures, not battery inverter output. A connected load in bypass mode may therefore be described by a different limit than a load powered from the battery. Keep the operating mode attached to any number and do not use a bypass value as evidence that the inverter can continuously power that load.

Verify the charging and accessory path

The unit lists a built-in 400 W MPPT solar input using a separately sold DJI MC4 cable. The support specifications list SDC input at 9–28 V and up to 400 W, and SDC output at 9–28 V and up to 300 W. A vehicle socket is listed at up to 120 W from 12 V or 240 W from 24 V. A separate DJI cable can take charging from a fuel-car battery through SDC at up to 400 W. These are distinct input arrangements and accessories; connector fit alone does not establish generic compatibility.

The retractable USB-C cable and USB-C port are each listed up to 100 W, but the combined USB-C output is limited to 150 W when both are used. The page also names DJI SDC accessories and explicitly says the Power Expansion Battery 2000 and DJI Power 1 kW / 1.8 kW Super Fast Car Chargers are not supported. Do not generalize the SDC connection to arbitrary third-party devices or assume that the broader Power 1000 family’s accessories fit this Mini model.

Understand UPS, timeout, and load limits

DJI’s support FAQ reports a UPS transition within 0.01 seconds in a controlled laboratory environment. The manual calls this a basic UPS feature and explicitly says the product does not support 0 ms seamless switching. It warns against equipment that requires 0 ms UPS, including medical equipment, and recommends connecting one device at a time because multiple devices may trigger overload protection. This manufacturer timing claim does not prove continuity for a named computer, router, or medical device.

By default, AC output times out after 30 minutes without an AC load. For intermittent devices such as a refrigerator, the manual instructs the user to hold the AC button until the indicator is solid to maintain output. Check the setting and the current manual before relying on an intermittent load; a device can stop drawing while cycling and still need the outlet to remain on.

The launch announcement says selected 1,200 W devices can be powered, but it gives no mode, test conditions, or supported-device list that reconcile this statement with the support page’s 800 W continuous and 1,000 W maximum inverter ratings. Do not infer a general 1,200 W capability from that phrase. The evidence also does not establish independent runtime, startup performance, Canada-specific outlet mapping, or device-specific UPS continuity. Match the exact regional model to its manual and the device’s own electrical requirements before use.